How to overcome Dual Boot Windows Doesn’t Boot Shows 0x0000006b Error?

Assume that you are in a situation where in desktop stopped responding due to booting error. That time no tactic will work and you will feel hassle right?

As you are reading this page you might be experiencing same circumstances. If that so, patrol over to get a predefined solution to your problem.

Before going through it, let’s check a real time scenario which user is generally facing:

“I’m in a dreadful situation. Today morning when I turn on my system, it is not booting up. It is reflecting an error like this ‘0x0000006b’. I have no more access to my data and I’m running dual operating systems on it. Can someone help me to fix this error? I need to access my system data on urgent basis.”

Normally if you are running dual operating system on a single computer, then it is termed as dual boot. When you are using dual boot, system will become slow and takes time to load the operating system. Sometimes it may take couple of minutes to start up the screen.

So be patient and wait till Windows boot up. Even after taking so long if it doesn’t boot, then you have to make use of a recovery solution to restore your valuable data from it.

Solution to retrieve dual boot system

If your dual boot Windows doesn’t boot and shows 0x0000006b error, then use Yodot Hard Drive Recovery application. It is an ultimate tool which can easily roll back your data from partitions. Even if the partition is formatted/ re formatted, the program has the ability to retrieve data from it. It not only bring back data from Windows partition but also from other storage devices like USB flash drives, external hard drives, SSDs, etc. This tool can run on platforms like Windows XP, Windows Vista, Windows server 2003 and 2008, Windows 7, Windows 8, Windows 8.1 and Windows 10.

Use below steps to execute the software

Connect your non booting hard drive to another system -> Download Yodot Hard Drive Recovery application here -> After finishing installation go through the tabs ‘Partition Recovery’ and ‘Formatted/ Reformatted Recovery’ -> Go with ‘Partition Recovery’ tab -> The program lists you the drives available on the system -> Mark the externally connected hard drive -> Allow the software to scan the drive -> Once the process is done, you can use ‘Data View’ and ‘File Type View’ to select the retrieved data -> Preview media files if there is any -> At last save the resultant data to desired destination folder.

BSOD While Installing Windows 10

I have faced a critical issue few hours back. Here is my problem ‘While I was upgrading my system to Windows 10, suddenly a beep sound came and which left my system with blue screen completely. Even after restarting the system multiple times, the same screen appeared as a result I couldn’t perform any operation on it. I need to get back all the data from it. Anyone have a solution for this? Please help me.

As Microsoft introduced Windows 10 as an automatic update from Windows 8.x OS version, most of the users have quickly grabbed this chance already. There are many advantages in using Windows 10 operating system. Take an example; no need to install drivers separately as it is offering automatic driver installation software for any devices like Mouse, keyboard, routers, etc.

But, if you can’t make the installation process properly then you will be affected by severe data loss and sometimes your system will undergo a blue screen of death. Let’s have a look on reasons which results in blue screen so that you can be careful while doing installation.

  • Errors while installing Windows 10 OS
  • Accidentally pressing cancel button in middle of process will abort the installation
  • Boot sector damage in the middle of process

You probably will not have any clue where to start after affecting with BSOD. At times, you will feel worried in searching for a predefined technique to restore your data. Don’t hassle if that is the case; because this article is right here to help you. Have a look at it.

Which application is helpful?

If your screen turns BSOD while installing Windows 10 operating system on your system, then use Yodot Hard Drive Recovery program. It is an ultimate utility which can easily get back your data from the system. This powerful utility has been designed with advanced scanning algorithms to finish recovery in a quick way. This program contains special restoring module which can retrieve data like documents, spread sheets, compressed archives, personal files, audios and videos, images, etc. In addition to this, it can efficiently bring back data even if blue screen is appearing on your system. Along with Windows 10, the software supports other operating system platforms like Windows XP, Vista, Server 2003 and 2008, 7, 8.x and 10.

Follow the procedure to run the program

Connect your hard drive to other Windows pc incase it won’t boot -> To avail the features available in the tool, firstly download Yodot software on it -> First screen approaches desktop after double clicking on shortcut icon -> Two options will be available to go through ‘Partition Recovery’ and ‘Formatted/Reformatted Recovery’ -> Make first tab as selection -> The tool scans the drives and display you the list -> Choose the externally connected hard drive -> Allow it to scan the entire drive -> Once it is done, you will be listed by restored data -> Make use of two unique view types to make easy selection ‘Data View’ and ‘File Type View’ -> Preview some data to confirm -> Send the retrieved data  to your preferred destination location.

External Hard Drive Freezed Recover Data

Hello everyone, I’m using a 1 TB external hard drive from past one year because I don’t have enough space on my system. From past few days, my external hard drive is taking so long to open and yesterday suddenly it got freeze. I tried it connecting to another system but no use. I need to restore data from it. Is there any possibility to do it? Thanks in advance for help.

Whenever hard drive freeze, it is difficult to access data from it. Sometimes, the external hard drives will work normally even after freeze by system restart. Let’s see some general reasons when the above situation happens:

  • Severe malware present in the drive prevents accessibility of the drive and from accessing data from it
  • Constantly converting the file system from FAT to NTFS, NTFS to FAT or vice versa

Don’t worry much if you are the one facing the situation exact to above because you have many options to utilize. The thing you have to bother about is to search a reliable solution from list of options. If you still looking forward for the solution then, here you go.

Preeminent tool to get back data from freezed external hard drive

If you are looking for a solution for external hard drive freezed recover data then, Yodot Hard Drive Recovery is the good fit technique to use. It is a perfect solution to bring back data not only from a freezed hard drive, but also from corrupted/ inaccessible external hard drive. It is designed by using advance scanning algorithms to finish recovery process in a quick way. Many brand external hard drives like Transcend, Sony, Toshiba, Kingston, Dell, etc are supported with this tool. All it needs is a system with Windows operating system (Windows XP, Windows Vista, Windows server 2003 and 2008, Windows 7, Windows 8, Windows 8.1 and Windows 10).

Instructions to execute the tool

Connect external hard drive to a healthy Windows PC -> Download and install Yodot Hard Drive Recovery application on it -> Launch the program to proceed further -> On main screen you have two options called ‘Partition Recovery’ and ‘Formatted/ Reformatted Recovery’ -> Choose one preferred option based on your data loss issue -> Now the tool will scans and display the drives available on the system -> Pickup the partition that is connected to the system -> The software scans the entire partition -> Once it is done, you can use ‘Data View’ and ‘File Type View’ to select files from it -> Preview then to confirm recovery process -> At last send retrieved data to desired folder.

Data Recovery from Crashed RAID 0

Hi this happened few hours ago and I’ve been looking all over the internet ever since for a solution but I just can’t find anything. What happened is I just booted up my computer normally but it froze on boot and it looked like there wasn’t going to be a recovery so I did a hard shutdown and booted it up again and it all seemed fine until I logged in and Intel Rapid Storage popped up saying one of my drives had failed. It was an SSD in RAID 0 config and I have no idea what affected it or how to fix it. I have a pretty powerful system and I have been using it for a while now. This is the first time this has happened. I’d definitely prefer not reformat anything, that means backing up about 2Tb and I don’t have that storage anywhere apart from my laptop. Please help me a way to recover all my crucial data from crashed RAID 0. Thanks in advance!

Before you rush to recover RAID 0, you need to understand the causes of RAID 0 crash. And those are:

  • Failure of one or several RAID 0 member disks
  • Failure not associated with the member disks
  • unintentional deletion or user error
  • Due to Malware/virus
  • Running RAID array on degraded mode
  • Controller failure due to power surge
  • Corrupted RAID configuration setting of NVRAM in controller card
  • Wrong or partial rebuild during replacement of defective drive
  • Complete system breakdown ahead completion of rebuild
  • System corruption

Now it is time to discuss how we can do data recovery from crashed RAID 0. This issue cannot be fixed with manual methods so for that we must go with an appropriate third party tool which is capable of handling this kind of issues. Read the next paragraph as it provides the suitable solution to fix the above given problem.

Application to regain data from failed RAID 0:

An outstanding software to get back lost or deleted data from RAID 0 drive is Yodot Hard Drive Recovery. This tool can recover data from various storage media like hard drive, external hard drive, memory card, iPods, USB flash drive etc. It has capability of searching for all possible file types from RAID array like RAR files, ZIP files, MS office files, PDF documents, audios, photos, videos etc. and retrieve them efficiently. In addition to RAID 0, it can recover files from other different RAID partitions such as RAID1, RAID2, RAID4 and RAID5. This tool can be installed on Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows XP, Windows Server 2008 and Windows Server 2003 operating systems.

Simple steps to use the software:

First connect your affected RAID 0 drive to Windows system and download Yodot Hard Drive Recovery tool. Install the utility on that system and proceed. Further, run the application and follow guidelines given on the main screen. Then, primary screen will display two options, i.e. “Partition Recovery” and “Formatted/Reformatted Recovery”, select the suitable option based on data loss scenario. Further, the software will display a list of drives available on that system choose the RAID 0 drive from where data has to be recovered. Now, application will provide an option to select required file type or just click on “Skip” button to select all files by default. Then, software will scan the selected RAID 0 drive and display recoverable files under Data view / File Type View. Later, have a look at each retrieved files using ‘Preview’ option and store them to a destination location of your choice.

Acer Aspire One Recovery

“I was using Acer Aspire one laptop from past 2 years. It was working fine, today while working on it, suddenly it started making some weird noises and after few minutes it got crashed. I stored huge amount of data in it. Those data are very important to me. Can anyone suggest me the way to recover my essential data from Acer Aspire one laptop?”

Here, there are several reasons that may cause loss of data from Acer Aspire one laptop:

  • If Master Boot Record gets corrupted, data present in laptop will becomes inaccessible
  • Inappropriate way of installation/ reinstallation/ upgrading of operating system on laptop
  • Due to increase in number of bad sector, software conflicts, and wrong way of reformat process will damage the drive on laptop making data inaccessible
  • Errors like “0*80300024, format error” and so on makes the storage device inactive or unresponsive on laptop, which cause data loss

Above mentioned scenarios are very common and happens very often by making data inaccessible. In such cases make use of Acer Aspire One Recovery utility

Acer Aspire laptop data recovery software:

Make use of Yodot Hard Drive Recovery application to retrieve data from Acer Aspire One laptop. By employing this you can rescue lost/deleted/corrupted/missing data from laptop. It has ability to restore all types of files like documents, Excel sheets, images, folders, videos, program files, executable files, PDFs, etc. from laptop. It can regain data from external hard drive, pen drive, flash memory card, and other possible storage devices having ExFAT, FAT32, FAT16, NTFS, NTFS5 file systems.  Data recovery program works on Windows OS running with Windows 10, Windows 8, Windows 8.1, Windows 7, Windows Vista, Windows XP, Windows 2003 and Windows 2008 computers.

Guidelines to retrieve data on Acer Aspire One laptop:

Download Yodot Hard Drive Recovery software to laptop by visiting this link -> Install it, launch the application by following onscreen instructions-> It provides two options namely ‘Partition Recovery’ or ‘Formatted / Reformatted Recovery’ -> Select one option based on data loss from Acer laptop and proceed next-> Then utility will display all the physical drives present on it ->  Then choose the drive that represents drive from which files are to be restored->  Pick the file types to retrieve data or else click on ‘Mark All’ option and proceed with scanning ->As soon as scanning of drive gets completed, you can view recovered list of data in ‘Data View’ or ‘File Type View’-> At last, save retrieved data by selecting the target location.

Tool to Restore Windows Partition

“I have a Windows computer and I had left very less space on one of my partition. So I decided to extend the volume of drive but while doing so the partition got deleted. That drive contains lot of important files. Is it possible to recover my deleted partition?”

You must remember one thing in above situation: you should not format that drive for further usage and stop using it immediately.

Generally partition may get deleted or lost in various incidents like:

  • When computer hard drive is infected by malware
  • Incorrectly resizing hard drive
  • Installing unauthorized third party application on Windows system
  • Improper installation or update of Operating System
  • Absence of system related files

  It is not an effortless work to recover data from a partition, once it is lost or got deleted. You need to use appropriate windows partition recovery tool to achieve the task. 100% chances are there to restore partition data using robust tool like Yodot Hard Drive Recovery, even if partition is lost or deleted from system hard drive.

You can restore deleted or lost partition data by using result oriented tool Yodot Hard Drive Recovery in a most simple way. Powerful built-in algorithms can easily retrieves data from corrupt as well as deleted partitions on system hard drive within limited period of time. Apart from this, it can perform inaccessible, unbootable and unreadable hard disk data recovery on Widows system with ease. This application works on read only mode that does not intact original data present on your partition. Additionally, this utility is helpful in regaining data from formatted, reformatted partition on SSD, external hard drives, pen drives, memory cards and many other devices. This program is compatible to recover partition on all versions of Windows operating system such as Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows XP, Windows Server 2003 and Windows Server 2008.

Follow this simple procedure to retrieve data from windows partition:

  • Click this link to download Yodot Hard Drive Recovery software and install it on your windows computer
  • Run the utility and select Partition Recovery among “Partition Recovery” and “Formatted/Reformatted Recovery” options
  • In displayed list of drives and partitions, select hard drive from which you recovering data and click on Next
  • Select file types (if you wish to restore only specific files), else click on Skip
  • the retrieved data will be displayed in “Data view” and “File type view”
  • Select and preview restored data in shown list of recovered data
  • Mark data which need to be regain
  • Finally mention destination to save rescued data